Heart rate zones give you a way to check effort without relying only on pace. To set them, you need an estimate of your maximum heart rate and, if you use the Karvonen method, your resting heart rate. This guide shows how to get both and calculate your bands.
Why use heart rate in rowing
Heart rate is useful on the water, where there is no split to watch. It also shows how your body is responding to a session, and it can reveal fatigue, heat stress or poor recovery. But heart rate reacts slowly. It lags behind changes in effort, so it is less useful for short intervals than for steady pieces.
Find your maximum heart rate
Maximum heart rate varies a lot between people, so any formula is only an estimate. There are three common approaches:
- The 220 minus age formula. It is widely used, but it is a rough guide. Individual values often differ from it by 10 to 12 beats per minute or more, in either direction.
- The Tanaka formula. 208 minus (0.7 x age) is generally considered a better population estimate than 220 minus age. It is still an average, so individual values can differ.
- A test. A warm-up followed by a hard effort of several minutes, with the highest heart rate reached taken as your estimate. A laboratory test is the most accurate. Only do hard field tests if you are healthy and have trained before.
Measure your resting heart rate
Measure first thing in the morning, before you get up or move around. Take readings over several days and use the average. A resting rate that stays several beats above your usual level can be a sign of fatigue, illness or poor sleep.
Calculate your zones
There are two common ways to do the sum.
- Percentage of maximum. Target = maximum heart rate x zone percentage. It is simple, but it ignores resting heart rate.
- Karvonen method (heart rate reserve). Target = (maximum heart rate minus resting heart rate) x zone percentage, plus resting heart rate. It adjusts for your resting rate and tends to be more personal.
Here is a worked example for a 35-year-old with a resting heart rate of 50. The Tanaka formula gives 208 minus 24.5, or 183.5, which we round to 184. The heart rate reserve is 184 minus 50, or 134. For UT2 at 60 to 70 percent:
- 60 percent: 134 x 0.60 = 80.4, plus 50, is about 130 beats per minute.
- 70 percent: 134 x 0.70 = 93.8, plus 50, is about 144 beats per minute.
So a UT2 band of roughly 130 to 144 beats per minute.
Approximate zone bands
These are approximate, and sources differ:
| Zone | Approximate % of max heart rate |
|---|---|
| UT2 | About 60 to 70 |
| UT1 | About 70 to 80 |
| AT | About 80 to 90 |
| TR | About 90 to 95 |
| AN | Close to maximum |
Feel and pace checks matter as much as the numbers. The zone names are explained in the rowing training zones guide.
Chest strap or wrist sensor
A chest strap generally tracks beat-to-beat heart rate more reliably, especially when effort changes quickly. Wrist optical sensors can lag, and they can be less accurate during rowing because of arm movement and grip. If you train with a wrist device, check it against a chest strap over a few sessions before relying on it.
Heart rate drift
During long steady pieces, heart rate often creeps upward even when pace and stroke rate stay the same. This is common, particularly in the heat. If it climbs well above your band, ease the stroke rate or the pressure, rather than forcing the same split. UT2 training covers how to judge an easy piece by feel as well as by number.
What changes heart rate
Heart rate responds to heat, dehydration, caffeine, poor sleep, illness, stress, altitude and recent training. A session that looks easy on pace can sit high on heart rate for any of these reasons.
Some medications, including some used for blood pressure or heart rhythm, can lower heart rate. If you take any medication that affects heart rate, or you have a heart condition, check with your doctor before using heart rate targets for training.
When heart rate is less useful
Heart rate lags in short intervals, in the first few minutes of a session, and in very hard efforts. For those, rely more on split, stroke rate and perceived effort. Heart rate is more useful for steady work and for longer threshold sessions. Anaerobic threshold training for rowers covers AT sessions where heart rate is a good guide.
Putting it together
Set your bands once, check them against a few easy sessions, and compare heart rate with split and feel. Re-check your maximum and resting heart rates every few months, since both can change with training. UT1 rowing and the 80/20 rule in rowing show how these bands fit into a weekly plan.