Indoor Rowing

Drag Factor on a Rowing Machine: What Setting to Use

Drag factor is the number your rower's monitor shows for how fast the flywheel slows. Learn how it differs from the damper setting and how to keep it steady.

On this page
  1. The short answer
  2. Damper and drag factor are different
  3. How to check your drag factor
  4. What number is typical
  5. How to choose and keep a setting
  6. Machines that do not let you change it
  7. Common mistakes

The short answer

On a Concept2, the damper is a lever from 1 to 10 that controls how much air reaches the flywheel. The drag factor is the number the monitor shows for how quickly the flywheel slows after each stroke. It reflects the resistance you are working against, and it changes with dust, temperature, altitude and the machine itself. There is no single correct setting. Choose one that feels smooth and lets you keep good technique, then keep it the same from session to session.

Damper and drag factor are different

  • The damper is a setting you control. A higher number lets in more air, which usually feels heavier.
  • The drag factor is a measurement the monitor makes. It shows how the flywheel is slowing, so it is the number to watch for consistency.

The same damper setting can give a different drag factor on two machines, or on the same machine after it has been cleaned or moved. That is why the monitor’s number is more useful than the lever for comparing sessions.

Higher damper does not automatically mean harder work. Your pull still sets the effort. Changing the damper changes how the stroke feels.

How to check your drag factor

On a Concept2 PM5 monitor, the drag factor can be shown through the menu, usually under More Options and then Display Drag Factor. Row a few steady strokes, ignore the first few, and read the number as it settles. Check your monitor’s manual if the menu is different on your model.

What number is typical

Ranges quoted online differ. Some guides suggest about 100 to 110 for many women and about 125 to 130 for many men. Others put many adults in a wider band, roughly 115 to 140. Treat any range as a starting point, not a target.

Going very high, such as 150 or more, does not make a workout faster. It mostly adds load to your back and legs, and many people find it harder to keep good form. If you are new to a rower, start in the middle of the range you see quoted and adjust slowly.

How to choose and keep a setting

  1. Start in the middle of a quoted range, and row three or four steady pieces.
  2. Adjust in small steps, around 3 to 5 points at a time, and row for a few minutes after each change.
  3. Pick the setting that lets you keep a smooth stroke and a steady split.
  4. Record the drag factor in your training log, so you can repeat it.
  5. Keep the setting steady for tests and comparisons. Changing it mid-block makes progress hard to read.

If the drag factor drifts, check the flywheel housing for dust and follow the maker’s cleaning guidance. Environmental changes such as humidity or altitude can also shift the number a little.

Machines that do not let you change it

Some rowers do not let you adjust the drag factor directly. On water rowers such as the Ergatta, the water level and the training program set the feel, and the effort you put in sets the resistance. On some connected rowers, a computer-controlled program adjusts the resistance during a workout. Check the manual, or the machine’s app, before you assume the setting is yours to change.

For a comparison of how each resistance type is set and felt, see the resistance guide.

Common mistakes

  • Setting the damper to the maximum because it sounds like the hardest option. It usually adds load without adding speed.
  • Changing the setting every session, which makes your splits and drag numbers impossible to compare.
  • Comparing drag factors between machines. A number on one rower is not a fair benchmark for another.
  • Ignoring the setup. Straps, seat and footplate affect how the stroke feels as much as the damper does. See how to set up a rowing machine.

For beginners who are still learning the stroke, the beginner rowing program suggests keeping the damper low while you focus on form.

The complete guide to indoor rowing

Indoor Rowing Training: How to Build an Erg Program
Read the guide

Keep exploring

Guides from other topics

All topics →