Indoor Rowing

Is a 4 minute 1000m row good?

A 4 minute 1000 m row is a 2:00 split. Learn what that pace means for different rowers, and how to plan a 1K piece so you can hold it for the full distance.

On this page
  1. The short answer
  2. What 4:00 means as a split
  3. What makes a time “good” for you
  4. Plan a 1K piece
  5. Use a 500 metre test to set the pace
  6. Common mistakes

The short answer

A 4:00 1,000 metre row is a 2:00 average split. Whether that is good depends on your sex, age, body weight, training history and goals. For many recreational rowers it is a reasonable result. For trained or competitive rowers it is a starting point rather than a finish line. The best comparison is your own last 1K.

What 4:00 means as a split

A 1K is two 500 metre blocks, so the time for 1,000 metres is twice your split. A 4:00 time means a split of 2:00 for the whole piece. The split guide shows how to read the monitor’s average split and convert it into a finish time for other distances.

What makes a time “good” for you

Several things change what a 1K time means:

  • Sex and age. Typical performance differs, and it changes with age in different ways for different people.
  • Body weight and height. On an erg, a larger rower can often produce more power, which shows up as a faster split. That is a difference in output, not necessarily in fitness.
  • Experience. A rower with a few months of practice may row a 1K very differently from someone who has trained for years.
  • Goal. A 4:00 1K may be a benchmark for general fitness, or a stepping stone to a faster target.

Published tables of 1K times for different groups exist, but they differ by source and are not all based on the same method. Use them as a rough guide only.

Plan a 1K piece

A 1K is short enough to go hard, and long enough to punish a poor start. A common plan:

  1. Warm up for 10 minutes with a few hard strokes near the end.
  2. Start a few seconds slower than your target split. Starting at target is the most common mistake.
  3. Settle by about 150 metres. Reduce the stroke rate a little, and hold the split with a steady drive.
  4. Hold the target through the middle. The middle of a 1K is where the pace starts to slip, so keep your focus on the next stroke.
  5. Push in the last 200 metres if you have something left.

For a longer piece with a similar approach, see the 6K erg test guide. For a 5K, the 5K time guide shows how the split turns into a finish time.

Use a 500 metre test to set the pace

A 500 metre time trial gives you a useful reference point. Row 500 metres as hard as you can sustain, note the average split, and use it as a guide for your 1K:

  • Do not start your 1K faster than your 500 metre average.
  • Expect the 1K average to be slower than the 500 metre average, because the piece is longer.
  • Adjust the target after the first 1K based on how you felt in the second half.

If you have a previous 1K time, use its average split too. A target between the two is a reasonable first plan.

Common mistakes

  • Going out too fast. It feels good for 300 metres and costs you for the rest of the piece.
  • Shortening the stroke to raise the stroke rate. Use full strokes; a short stroke wastes the leg drive.
  • Ignoring the damper. Change it before the piece, not during it.
  • Comparing with someone else’s age or sex group without checking the source of the table.

The complete guide to indoor rowing

Indoor Rowing Training: How to Build an Erg Program
Read the guide

Keep exploring

Guides from other topics

All topics →